Nicola has built a simple robot for painting of the wall. The wall is marked at each meter and the robot has a list of painting operations. Each operation describes which part of wall it needs to paint as a range from place to place, inclusively. For example: the operation [1, 5] means to paint the sections from 1 to 5 meters including sections 1 and 5. Operations are executed in the order they are placed in the list of operations. If the range of various operations are overlapped, then they must be counted once .
Stephan has prepared a list of operations, but we need to check it before the robot executes its painting plan. You are given the number of meters on the walls which need painting, (the painted zones can be separated by non painted parts) and the list of operations prepared by Stephan, you should determine the number of operations from this list required to paint the designated length of the wall. If it's impossible to paint that length with the given operations, then return -1.
Input: Two arguments.
- The required length of the wall that should be painted, as integer.
- A list of the operations that contains the range (inclusive) as a list of two integers.
Output: The minimum number of operations. If you cannot paint enough of the length with the given operations, return -1.
checkio(5, [[1,5], [11,15], [2,14], [21,25]]) == 1 # The first operation will paint 5 meter long. checkio(6, [[1,5], [11,15], [2,14], [21,25]]) == 2 # The second operation will paint 5 meter long. The sum is 10. checkio(11, [[1,5], [11,15], [2,14], [21,25]]) == 3 # After the third operation, the range 1-15 will be painted. checkio(16, [[1,5], [11,15], [2,14], [21,25]]) == 4 # Note the overlapped range must be counted only once. checkio(21, [[1,5], [11,15], [2,14], [21,25]]) == -1 # There are no ways to paint for 21 meters from this list. checkio(1000000011,[[1,1000000000],[11,1000000010]]) == -1 # One of the huge test cases.
Hint: To handle the beginning-end of the list, you could try running a binary search.
How it is used: This skillset is often used in computer simulations.
0 < len( operations ) ≤ 30
all(0 < x < 2 * 10 ** 18 and 0 < y < 2 * 10 ** 18 for x, y in operations )
0 < required < 2 * 10 ** 18
CheckiO Extensions allow you to use local files to solve missions. More info in a blog post.
In order to install CheckiO client you'll need installed Python (version at least 3.8)
Install CheckiO Client first:
pip3 install checkio_client
Configure your tool
checkio --domain=py config --key=
Sync solutions into your local folder
(in beta testing) Launch local server so your browser can use it and sync solution between local file end extension on the fly. (doesn't work for safari)
checkio serv -d
Alternatevly, you can install Chrome extension or FF addon
checkio install-plugin --ff
checkio install-plugin --chromium